容器额定容积40 升
有效容积- 在入口水平时，180 mm：10 升 - 在入口垂直时：17 升
液压装置 S1Qmax = 14.2 m³/h, Hmax = 18 m
介质温度Tmax 较高 40°C，短时间（较多 5 min）较高 65°C
电机功率- “E”规格： 230V，1~: 1.65 kW - “D”规格：400V，3~: 1.5 kW
运行模式S3-50%，较多开关 60 次/小时
作为完整组件提供球形 RFV 包括在供货范围内
Design
The lifting unit is provided with a variety of horizontal/vertical
inlet nozzles (1). The hydraulic system (3) pumps the fluid
handled into the vertical discharge line (8).
Function
The fluid to be handled flows into the lifting unit through
horizontal/vertical inlet nozzles (1) and is collected in a gas,
odour and water-tight plastic tank (10). Controlled by a level
sensor (2) and control unit, either one or two pumps (3) are
started up automatically as soon as the defined fill level is
reached. The fluid is pumped off to a level above the flood
level, towards the public *er.
液晶显示电控箱，自动 反馈系统，全自动控制 泵的启停，并故障报警。 控制箱内置蓄电池，停电也能报警。
合金钢加厚切割 装置，每分钟可 切86400次，悬 浮式结构，不卡机。
mini-Compacta US (40 litres) / U (60 litres) / U (100 litres) /
UZ (150 litres):
▪ Impeller end: shaft seal ring
▪ Drive end: 1 shaft seal ring
▪ A grease fill is provided between the impeller-end and
drive-end shaft seals.
mini-Compacta US (100 litres) / UZS (150 litres) / variant C:
▪ Impeller end: mechanical seal
▪ Drive end: 1 shaft seal ring
▪ An oil reservoir, which is supplied filled with ecologically
acceptable white oil, is fitted between the impeller-end
and drive-end shaft seals.
http://bjsxm168.b2b168.com
